Electric Heating Systems Ltd

Electric Heating Systems Ltd

---

Electric heating systems were founded to supply high quality, low-cost domestic heating equipment that makes the best use of renewable resources in order to reduce our global warming impact while keeping running costs and installation costs as low as possible.

We aim to supply the most economic systems to provide heating and hot water to a property with low CO2 emissions.

Eco Values
Our Electric Boilers address the growing demand for home heating and hot water solutions and can offer a cost-effective alternative to current oil and LPG boilers.

Stylish Design And Flexible Siting
Our sleek design of electric boiler will look good anywhere. As there is no need for a flue, you can put it on show or in a cupboard in the middle of a house. It’s easy to operate, with a modern touch screen panel and is so quiet you wouldn’t know it’s on.

Quiet and Efficient
Our Electric boilers are 99.8% efficient, meaning nearly all of the electricity you use goes into making hot water.

Renewable Source Technology
Electric boilers can be run from renewable resources such as wind generated, tidal and solar power which means you can run your boiler completely free of CO2 emissions. A perfect way to help the environment we live in.

Re-Use Existing Radiators
When you convert to electric there is no need to replace existing pipework or radiators.

EHS Electric Combi Boilers
The EHS electric combi boilers will supply all of your hot water and heating needs, just like a gas boiler, but without the installation expense or the need to change your radiators.

Our electric combi boilers are the ideal solution for instant heating and hot water requirements in small flats or small homes with one bathroom, where the homeowner requires a cheaper alternative to LPG and oil or the design of the property precludes the use of a gas boiler due to the positioning of a flue. Outputs from 8kw to 24kw ensure most applications are covered.

The Boilers internal plumbing is configured to an ‘S’ Plan design and includes a pump and 5litre pre-plumbed Expansion Vessel for the heating circuit.

EHS Electric System Boilers
The EHS Electric Boiler range will supply your domestic hot water and heating needs without the installation expense of a heat pump or the need to change your radiators. Change from traditional gas boilers to carbon-free electric heating the easy way.

Our electric system boilers are the ideal heating solution for larger homes with a wet central heating system.

They will also provide large amounts of mains pressure hot water when coupled with an unvented indirect cylinder. If you are on a variable electric tariff with a low night-time rate, this will also allow you to heat all of your hot water when electricity is much cheaper.

Boiler Packages
At Electric Heating Systems Ltd, we are continually developing individual products and packages to ensure that the hot water and central heating system we offer not only fits the needs of the customer but also provides the installer with quality products that are easy to fit and purchase.

The quality of the products from EHS is second to none and our premium range Primus Electric boilers come with a five year guarantee, are easy to install and simple to use. Our cylinders are manufactured in the UK and come with a lifetime warranty. For those on variable electricity tariffs (economy 7, Octopus Go etc) there is a cost-saving to be gained by heating your Hot water at times when the electricity is cheap.

Air Source Heat Pumps
Air source heat pumps can sometimes be referred to as an air-to-water source heat pump, which transfers heat from the outside air to water, which then heats your rooms via radiators or underfloor heating. They are often used to heat water stored in a hot water cylinder.

Hot Water Cylinders
The EHS pre-plumbed indirect hot water storage cylinders feature an internal coil and are designed for use with either our electric system boiler or an air source heat pump as the primary heat source (either sealed system or open vented). Manufactured from Duplex stainless steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide backup heat or to link into a solar PV system.

Thermal Storage Batteries
Sunamp’s thermal batteries use a phase change material (PCM), to efficiently absorb and release thermal energy during a melting and freezing process in a similar way to the gel in a pocket handwarmer. They can be charged directly by electricity (including solar PV) or indirectly by boilers or some high heat heat pumps.

They are up to 4 times smaller than the equivalent hot water cylinder, requiring little routine maintenance. Their sleek, super-compact design means they look good in any home and free up valuable storage space.

---

Contact us