UK
Ireland
Scotland
London
Construction News
26/09/2011
'See SE Controls' Residential Smoke Ventilation System At The M&E Exhibition
SE Controls will be launching their unique TAMPERPROOF Manual Control Point (MCP) and their revolutionary SHEVTEC Extended Travel Distance smoke ventilation system at the M&E Exhibition, Olympia, London, 11th & 12th October, on stand C113.
The TAMPERPROOF MCP is the only product available on the market which can deliver the full functionality required of an MCP whilst complying with the imminent EN12101-9 product standard.
Along with exhibiting, SE Controls will be presenting Smoke Ventilation in Residential Buildings on the 11th October and Window Automation for Natural Ventilation on the 12th October at the Innovation Showcase, held within the exhibition. The presentations will provide a valuable insight into the application and products of both systems.
SE Controls have designed and developed the TAMPERPROOF MCP to meet the growing need for a product which can overcome nuisance operation, especially in student accommodation but at the same time provide the manual control required by fire fighters. Nuisance operation is becoming a real concern for facility managers, building owners, occupiers and fire brigades as inappropriate operation of the manual control points can not only cause activation of a system, if a fire does occur once an MCP has been operated, initiation of vents on fire floors can be locked out and fail to operate as a direct result.
The orange (RAL 2011) MCP displays system and vent status both audibly and visibly through three LEDs, "power, fault and activated" (all requirements of the EN standard). The Tamper Proof MCP will be set up on the stand to demonstrate its functionality in corporation with the automatic opening vents.
SE Controls will also be demonstrating their revolutionary SHEVTEC Extended Travel Distance smoke ventilation system following their recent flawless installation of the system into student accommodation in Nottingham. The system is the culmination of two years research and development which has delivered a system that can give designers, installers, regulators, occupants and firefighters advantages currently unmatched in the smoke ventilation market. The SHEVTEC Extended Travel Distance System’s components are all fully CE marked and tested to the stringent EN12101 SHEVs series. The system is completely flexible as the components are fully compatible with each other and all controlled by SE Controls’ SHEVTEC OSLoop Control System, which via intelligent MCPs monitors smoke detector inputs, cable outputs and position of the smoke vents. All of this key information can be displayed on an elegant SHEVTEC Repeater Panel all of which is on a working demonstration on their stand C113.
Other newly developed products on display will include the SHEVTEC® Smoke Shaft Actuator and Door. The SHEVTEC Smoke Shaft Door and Actuator, tested to BS 476-22:1987, BS 1634-1:2000, BSEN 1363-1:1999, BSEN 1364-2:2000 and to the principles of EN12101-2:2003 Annex G, gives designers the ability to match the AOV to other doors in the development. As an alternative solution SE Controls can deliver the SHEVTEC Damper which can be concealed behind a neat grill. All components are CE marked to the current EN12101 SHEVs standards or in the case of the OSLoop control system, fully compliant with the imminent EN 12101 parts 9 &10.
SE Controls commercial team will be at the show on stand C113 to share their expertise and knowledge throughout the exhibition and welcome any questions and/or advice that visitors may require. There will also be a range of literature on the stand to take away that includes case study brochures along with the smoke ventilation solutions brochure for residential buildings.
SE Controls is a rapidly growing UK based company operating across the globe with offices on several continents with regional specialists offering clients expert advice based on local legislative requirements. The company is continually seeking exceptional individuals to join the various teams of specialists, visit the website at www.secontrols.com to learn more about current vacancies. To discuss possible project requirements with SE Controls and request literature, please call their head office in Lichfield on 01543 443060.
The TAMPERPROOF MCP is the only product available on the market which can deliver the full functionality required of an MCP whilst complying with the imminent EN12101-9 product standard.
Along with exhibiting, SE Controls will be presenting Smoke Ventilation in Residential Buildings on the 11th October and Window Automation for Natural Ventilation on the 12th October at the Innovation Showcase, held within the exhibition. The presentations will provide a valuable insight into the application and products of both systems.
SE Controls have designed and developed the TAMPERPROOF MCP to meet the growing need for a product which can overcome nuisance operation, especially in student accommodation but at the same time provide the manual control required by fire fighters. Nuisance operation is becoming a real concern for facility managers, building owners, occupiers and fire brigades as inappropriate operation of the manual control points can not only cause activation of a system, if a fire does occur once an MCP has been operated, initiation of vents on fire floors can be locked out and fail to operate as a direct result.
The orange (RAL 2011) MCP displays system and vent status both audibly and visibly through three LEDs, "power, fault and activated" (all requirements of the EN standard). The Tamper Proof MCP will be set up on the stand to demonstrate its functionality in corporation with the automatic opening vents.
-- Advertisement --
SE Controls will also be demonstrating their revolutionary SHEVTEC Extended Travel Distance smoke ventilation system following their recent flawless installation of the system into student accommodation in Nottingham. The system is the culmination of two years research and development which has delivered a system that can give designers, installers, regulators, occupants and firefighters advantages currently unmatched in the smoke ventilation market. The SHEVTEC Extended Travel Distance System’s components are all fully CE marked and tested to the stringent EN12101 SHEVs series. The system is completely flexible as the components are fully compatible with each other and all controlled by SE Controls’ SHEVTEC OSLoop Control System, which via intelligent MCPs monitors smoke detector inputs, cable outputs and position of the smoke vents. All of this key information can be displayed on an elegant SHEVTEC Repeater Panel all of which is on a working demonstration on their stand C113.
Other newly developed products on display will include the SHEVTEC® Smoke Shaft Actuator and Door. The SHEVTEC Smoke Shaft Door and Actuator, tested to BS 476-22:1987, BS 1634-1:2000, BSEN 1363-1:1999, BSEN 1364-2:2000 and to the principles of EN12101-2:2003 Annex G, gives designers the ability to match the AOV to other doors in the development. As an alternative solution SE Controls can deliver the SHEVTEC Damper which can be concealed behind a neat grill. All components are CE marked to the current EN12101 SHEVs standards or in the case of the OSLoop control system, fully compliant with the imminent EN 12101 parts 9 &10.
SE Controls commercial team will be at the show on stand C113 to share their expertise and knowledge throughout the exhibition and welcome any questions and/or advice that visitors may require. There will also be a range of literature on the stand to take away that includes case study brochures along with the smoke ventilation solutions brochure for residential buildings.
SE Controls is a rapidly growing UK based company operating across the globe with offices on several continents with regional specialists offering clients expert advice based on local legislative requirements. The company is continually seeking exceptional individuals to join the various teams of specialists, visit the website at www.secontrols.com to learn more about current vacancies. To discuss possible project requirements with SE Controls and request literature, please call their head office in Lichfield on 01543 443060.
Latest Construction News
29/01/2025
Caddick Construction has been awarded a £43 million contract to deliver the first phase of Cole Waterhouse's flagship regeneration scheme in Digbeth, Birmingham.
The project, known as Upper Trinity Street, marks a significant step in the area’s transformation.
Spanning 182,986 square feet, the re
29/01/2025
McLaren Construction has been appointed by O&H Properties to deliver the first phase of a £60 million Foster & Partners-designed development at the corner of New Bond Street and Grafton Street in London’s West End.
The seven-storey, 5,400 square metre prime retail and office scheme will feature ret
29/01/2025
GMI Construction Group has been awarded a contract to develop three high-specification warehouse units totalling over 175,000 square feet at Precedent Drive, Milton Keynes.
The £20 million project, commissioned by DV5 Last Mile Developments (UK) Ltd, a joint venture between Coltham and Delancey Re
29/01/2025
Plans for 106 sustainable new homes in Southville, a neighbourhood in South Bristol, have been approved as the city seeks to increase housing delivery to address growing demand.
Top 10 award-winning housebuilder The Hill Group will create a £60 million development on Raleigh Road, on land that was
29/01/2025
Bouygues UK has reached a major milestone in the fourth phase of the Hallsville Quarter regeneration project in Canning Town, London.
The project, part of the £3.7 billion Canning Town and Custom House Regeneration Programme, recently held a topping out ceremony, marking the completion of the 11-s
29/01/2025
Willmott Dixon Interiors is carrying out a significant upgrade to the roof of the National Maritime Museum in Greenwich, one of London's most iconic cultural landmarks.
As part of the £12 million project, the company is installing over 23,000 square feet of sun-protected glazing above the museum’s
29/01/2025
Equans has been appointed by Babergh and Mid Suffolk District Councils to carry out crucial decarbonisation work across the councils' housing stock, using funding secured through the Social Housing Decarbonisation Fund (SHDF).
The councils used the South East Consortium's Zero Carbon Framework to s
29/01/2025
In the world of construction, the quest for energy efficiency and sustainability is ever-evolving. Among the array of solutions available, EPS (Expanded Polystyrene) insulation stands out as a versatile and effective option for enhancing the thermal performance of buildings, particularly when used f
29/01/2025
BCP Council has completed significant coastal protection works at Hamworthy Park, ensuring its resilience against erosion for the next 20 years.
A 200-metre stretch of sea wall along the eastern promenade has been reinforced using low-carbon concrete, while new steps have been constructed to improv
29/01/2025
Geo-environmental consultancy and remediation contractor, The LK Group, has strengthened its team with a trio of recruits.
The multidisciplinary company's latest raft of hires comprises a new director, associate director and remediation manager.
The geo-environmental specialist, headquartered i
