Time and date
CONSTRUCTION DIRECTORY
Covers4pools
Capricorn Pool Cover System-Wiltshire
We can install Pool covers and systems up to 17m wide like this one Call John Spencer on 01904 341133 or email me
Pool covers
The use of pool covers out of hours reduces the evaporation rate from the pool surface and can save significant amounts of energy in swimming pools.
The lower evaporation rate reduces the energy needed to keep the pool water heated to the required temperature and the resulting reduction in energy use is significant.
The material we use is made by irradiation of cross linked foam NOT chemical Vulcanisation. This is a better way to make pool covers as irradiation absorbs the pool water at a much slower rate. This allows our thermal pool covers to have a longer useful working life.
Powder coated stainless steel
We can also offer to powder coat the stainless steel in white. This with a white cover can make a dramatic improvement on the look of the equipment.
Energy Saving swimming pool covers and systems
The reduced evaporation lessens the need for high ventilation rates and air heating in the pool hall can be reduced or shut off. This allows the air circulation system to be shut off, or turned down to a very low rate, when the covers are on.
In practice, some water may get on to the top of the pool cover and there may be some evaporation at the sides where the cover does not quite fit. There may also be some residual moisture in the air after the cover has been deployed so it may still be necessary to run the ventilation system at a low setting. Nevertheless, an effective pool cover will reduce the need for dehumidification out of hours and therefore substantially reduce energy consumption. Even where covers do not match the shape of a free form pool, they are still worthwhile: evaporation is still reduced in proportion to the area covered and hence yields energy and cost savings.
We can install Pool covers and systems up to 17m wide like this one Call John Spencer on 01904 341133 or email me
Pool covers
The use of pool covers out of hours reduces the evaporation rate from the pool surface and can save significant amounts of energy in swimming pools.
The lower evaporation rate reduces the energy needed to keep the pool water heated to the required temperature and the resulting reduction in energy use is significant.
The material we use is made by irradiation of cross linked foam NOT chemical Vulcanisation. This is a better way to make pool covers as irradiation absorbs the pool water at a much slower rate. This allows our thermal pool covers to have a longer useful working life.
Powder coated stainless steel
We can also offer to powder coat the stainless steel in white. This with a white cover can make a dramatic improvement on the look of the equipment.
Energy Saving swimming pool covers and systems
The reduced evaporation lessens the need for high ventilation rates and air heating in the pool hall can be reduced or shut off. This allows the air circulation system to be shut off, or turned down to a very low rate, when the covers are on.
In practice, some water may get on to the top of the pool cover and there may be some evaporation at the sides where the cover does not quite fit. There may also be some residual moisture in the air after the cover has been deployed so it may still be necessary to run the ventilation system at a low setting. Nevertheless, an effective pool cover will reduce the need for dehumidification out of hours and therefore substantially reduce energy consumption. Even where covers do not match the shape of a free form pool, they are still worthwhile: evaporation is still reduced in proportion to the area covered and hence yields energy and cost savings.
