Time and date
CONSTRUCTION DIRECTORY
Aask Us Ltd
Straight Connection
Straight Splice Connector ref : "x-SP1 Upstand Splice" to be slid into position at straight junctions.
On section aa-US50 1No. splice can be used, on all other types 2No. splices to be used. Once the splice is centrally positioned over the cut joint then the locking screws (omitted from drawing for simplicity) are to be tightened. Be careful not to apply too much pressure as this can mark the exterior face.
Straight Cuts can be made on site:
Aluminium profile to be straight cut using a fixed power site saw fitted with a blade to suit aluminium to ensure neat and accurate cutting. Profile should be securely clamped prior to any cutting operation to ensure freedom from vibration which may affect accuracy of the cut.
Straight Splice Connector ref : "x-SP1 Upstand Splice" to be slid into position at straight junctions.
On section aa-US50 1No. splice can be used, on all other types 2No. splices to be used. Once the splice is centrally positioned over the cut joint then the locking screws (omitted from drawing for simplicity) are to be tightened. Be careful not to apply too much pressure as this can mark the exterior face.
Straight Cuts can be made on site:
Aluminium profile to be straight cut using a fixed power site saw fitted with a blade to suit aluminium to ensure neat and accurate cutting. Profile should be securely clamped prior to any cutting operation to ensure freedom from vibration which may affect accuracy of the cut.
