FENCING SPECIFICATIONS
Temporary fence panel size; 3000 X 750 X 3.5mm green recycled polypropylene panels
Permanent fence panel size; 3000 X 750 X 4mm green recycled polypropylene panels

FITTED MEASUREMENTS 300mm vertically below ground, 375mm vertically above ground TECHNICAL DATA Density - Kg/m3 - 930 Tensile strength (Mpa) - N/mm2 - 26.0 Elongation at break - % - 460 Flexural yield strength (Mpa) - N/mm2 - 42.0 Flexural modulus (Mpa) - N/mm2 - 1250 Linear Thermal expansion - mm/m/°c - 0.150 Surface spread of flame - Class 3 FITTING DESCRIPTION The fence panels are fitted either into a 300 x 50mm slit created by a V backed sub soiler or “wiz” plough pulled by a tractor or in a trench excavated using a chain trencher or mini digger. Alternatively, if necessary, the trench is dug by hand. The preferred method for best results and most efficient fitment is the slitting method, where conditions suit. Once the panels are sited the slit is closed up by driving back along the line of the fence with a tractor, vehicle or compacted by hand. This creates a total seal between the soil and panels, which are fitted to the side of the trench nearest to the relevant population or the inside if a containment area. The panels are overlapped by 50mm then secured by aluminium blind rivets along the overlap joint. Panels can be cut down or the overlap increased to allow for uneven ground or contours. HERPETOSURE® fencing is designed to be reusable and recyclable, it also has a high level of impact resistance, therefore offering a much higher level of boundary security and removing the need to landfill expired fencing materials at the end of the project. ZERO project waste.